详解iOS多线程之2.NSThread的加锁@synchronized

那什么时候需要加锁呢，就是当多条线程同时操作一个变量时，就需要加锁了。

上代码

声明变量

@interface viewcontroller ()
@property (strong, nonatomic)nsthread *thread1;
@property (strong, nonatomic)nsthread *thread2;
@property (strong, nonatomic)nsthread *thread3;
@property (assign, nonatomic)int lefttickets;
@end

实现代码

- (void)viewdidload {
  [super viewdidload];
  
  self.thread1 = [[nsthread alloc] initwithtarget:self selector:@selector(selltickets) object:nil];
  self.thread2 = [[nsthread alloc] initwithtarget:self selector:@selector(selltickets) object:nil];
  self.thread3 = [[nsthread alloc] initwithtarget:self selector:@selector(selltickets) object:nil];
  self.thread1.name = @"thread1";
  self.thread2.name = @"thread2";
  self.thread3.name = @"thread3";
  // 总票数
  self.lefttickets = 10;
}
// 点击屏幕开启线程
- (void)touchesbegan:(nsset<uitouch *> *)touches withevent:(uievent *)event {
  [self.thread1 start];
  [self.thread2 start];
  [self.thread3 start];
}
- (void)selltickets {
  while (1) {
    @synchronized (self) {
      if (self.lefttickets > 0) {
        [nsthread sleepfortimeinterval:0.2];
        int count = self.lefttickets;
        self.lefttickets = count - 1;
        nslog(@"剩余的票数%d",self.lefttickets);
        nslog(@"当前线程=%@", [nsthread currentthread]);
      }else {
        nslog(@"票卖完了");
        nslog(@"退出线程%@",[nsthread currentthread]);
        [nsthread exit];
      }
    }
  }
}

打印日志

2016-11-04 11:52:25.117 tttttttttt[6753:74162] 剩余的票数9
2016-11-04 11:52:25.117 tttttttttt[6753:74162] 当前线程=<nsthread: x608000073880>{number = 3, name = thread1}
2016-11-04 11:52:25.393 tttttttttt[6753:74163] 剩余的票数8
2016-11-04 11:52:25.393 tttttttttt[6753:74163] 当前线程=<nsthread: x608000074540>{number = 4, name = thread2}
2016-11-04 11:52:25.661 tttttttttt[6753:74164] 剩余的票数7
2016-11-04 11:52:25.661 tttttttttt[6753:74164] 当前线程=<nsthread: x608000074580>{number = 5, name = thread3}
2016-11-04 11:52:25.932 tttttttttt[6753:74162] 剩余的票数6
2016-11-04 11:52:25.933 tttttttttt[6753:74162] 当前线程=<nsthread: x608000073880>{number = 3, name = thread1}
2016-11-04 11:52:26.164 tttttttttt[6753:74163] 剩余的票数5
2016-11-04 11:52:26.165 tttttttttt[6753:74163] 当前线程=<nsthread: x608000074540>{number = 4, name = thread2}
2016-11-04 11:52:26.438 tttttttttt[6753:74164] 剩余的票数4
2016-11-04 11:52:26.439 tttttttttt[6753:74164] 当前线程=<nsthread: x608000074580>{number = 5, name = thread3}
2016-11-04 11:52:26.704 tttttttttt[6753:74162] 剩余的票数3
2016-11-04 11:52:26.705 tttttttttt[6753:74162] 当前线程=<nsthread: x608000073880>{number = 3, name = thread1}
2016-11-04 11:52:26.975 tttttttttt[6753:74163] 剩余的票数2
2016-11-04 11:52:26.976 tttttttttt[6753:74163] 当前线程=<nsthread: x608000074540>{number = 4, name = thread2}
2016-11-04 11:52:27.232 tttttttttt[6753:74164] 剩余的票数1
2016-11-04 11:52:27.233 tttttttttt[6753:74164] 当前线程=<nsthread: x608000074580>{number = 5, name = thread3}
2016-11-04 11:52:27.505 tttttttttt[6753:74162] 剩余的票数0
2016-11-04 11:52:27.505 tttttttttt[6753:74162] 当前线程=<nsthread: x608000073880>{number = 3, name = thread1}
2016-11-04 11:52:27.505 tttttttttt[6753:74163] 票卖完了
2016-11-04 11:52:27.506 tttttttttt[6753:74163] 退出线程<nsthread: x608000074540>{number = 4, name = thread2}

我们一般用@synchronized来给线程加锁。它有什么用呢：

（1） 堵塞所在线程，线程里面剩下的任务只有当@synchronized里面的代码执行完毕才能继续往下执行，和队列的同步差不多是一个意思。
​

（2）当执行@synchronized里面的代码之前，所在线程要先检查是否有其他的线程执行里面的代码。如果没有，才继续往下执行。

再看打印日志里面最后一条，说明了只有线程“thread3”退出了，其他的线程没有退出。

我上篇文章讲，不用管线程的退出，任务执行完线程会自动退出。但是这是一个while循环啊！如果不退出线程，线程会一直执行。

- (void)selltickets {
  while (1) {
    @synchronized (self) {
      if (self.lefttickets > 0) {
        [nsthread sleepfortimeinterval:0.2];
        int count = self.lefttickets;
        self.lefttickets = count - 1;
        nslog(@"剩余的票数%d",self.lefttickets);
        nslog(@"当前线程=%@", [nsthread currentthread]);
      }else {
        nslog(@"票卖完了");
        nslog(@"退出线程%@",[nsthread currentthread]);
        // 不让线程退出
        //[nsthread exit];
      }
    }
  }
}

打印的日志

2016-11-04 12:01:53.309 tttttttttt[7110:78974] 当前线程=<nsthread: x600000076f40>{number = 4, name = thread2}
2016-11-04 12:01:53.556 tttttttttt[7110:78973] 剩余的票数0
2016-11-04 12:01:53.556 tttttttttt[7110:78973] 当前线程=<nsthread: x600000076fc0>{number = 3, name = thread1}
2016-11-04 12:01:53.556 tttttttttt[7110:78975] 票卖完了
2016-11-04 12:01:53.557 tttttttttt[7110:78975] 退出线程<nsthread: x600000077240>{number = 5, name = thread3}
2016-11-04 12:01:53.558 tttttttttt[7110:78974] 票卖完了
2016-11-04 12:01:53.559 tttttttttt[7110:78974] 退出线程<nsthread: x600000076f40>{number = 4, name = thread2}
2016-11-04 12:01:53.560 tttttttttt[7110:78973] 票卖完了

那又为什么只有线程thread2退出呢？（注：每次退出的线程是不确定的）因为当线程thread2退出了，并没有执行完@synchronized里的方法，线程thread1和线程thread3还在等thread2执行完了，它们好去执行呢。但是线程thread2已经死了，不可能再执行了。这就造成线程thread1和线程thread3一直都在内存里，没有被退出，造成了cpu不必要的开销，所以我们最好不要在@synchronized里面退出线程。

- (void)selltickets {
  while (1) {
    @synchronized (self) {
      if (self.lefttickets > 0) {
        [nsthread sleepfortimeinterval:0.2];
        int count = self.lefttickets;
        self.lefttickets = count - 1;
        nslog(@"剩余的票数%d",self.lefttickets);
        nslog(@"当前线程=%@", [nsthread currentthread]);
      }
    }
    if (self.lefttickets == 0) {
      nslog(@"票卖完了");
      nslog(@"退出线程%@",[nsthread currentthread]);
      [nsthread exit];
    }
  }
}

2016-11-04 12:06:51.795 tttttttttt[7295:81206] 票卖完了
2016-11-04 12:06:51.795 tttttttttt[7295:81207] 票卖完了
2016-11-04 12:06:51.795 tttttttttt[7295:81208] 票卖完了
2016-11-04 12:06:51.796 tttttttttt[7295:81206] 退出线程<nsthread: x60000026a3c0>{number = 3, name = thread1}
2016-11-04 12:06:51.796 tttttttttt[7295:81207] 退出线程<nsthread: x60000026a380>{number = 4, name = thread2}
2016-11-04 12:06:51.796 tttttttttt[7295:81208] 退出线程<nsthread: x60000026a740>{number = 5, name = thread3}

这就是nsthread加锁以及加锁的一些注意事项。如果感觉对你有用，记得关注啊，也希望大家多多支持。